MHK-1050T/MHK-1050C Completely Computerized Die Cutting Device with Four Aspect Stripping for Carton Box
The MHK series complete-computerized/scorching foil stamping/stripping/creasing die-chopping devices can effectively full the die chopping and embossing of products,as nicely as maintaining the optimum precision and solution quality.The MHK series entire-automatic/very hot foil stamping/stripping/creasing die-slicing equipment are properly geared up and almost can adapt to all die chopping demands of items.
Principal features:
one. High high quality feeder manufactured in ZheJiang with four suction nozzle for stack paper and 4 suction nozzle for offering paper , guarantees secure and quickly paper feeding .
two. Pre-loading device , non-stop feeding , with Max pile top to 1600mm.
three. The pre-loading unit is equipped with guiding rails , operator shift the stack paper to feeder properly and conveniently .
four. Side and entrance guiding have sensor which can adjust the sensitivity.
five. The anti-obstacle gadget stop the equipment ruined.
six. Paper feeding will be gradual down when the paper reach the entrance guiding , attain more correct spot .
7. Japanese NITA express belt , the velocity can be altered .
eight. Germany made stainless metal is utilized for convey board in buy to accomplish clean and rapid paper delivery .
nine. Pneumatic slicing plate elevate for straightforward slide in and out .
10.Easy way to turn more than and alter die slicing chase and plate with limited time .
eleven.Higher high quality gripper bars created in Japan with long existence time .
twelve.Substantial good quality U.K imported chain make sure stability and accuracy in lengthy time working .
thirteen.Computerized lubrication and cooling program for main generate and automated lubrication for principal chain .
14.Overload protection system with torque limiter in index box for the optimum protection of operator and products .
15.Crank shafts and worm rod is manufactured of forty Cr with heating handling . Turbine is made of copper .
16.High high quality imported air clutch .
seventeen.SMC pneumatic parts .
eighteen.The upper , middle and decrease stripping frames are controlled by three GPRS of cam wheels respectively.
19.Match with the centerline registration technique in die chopping device , the same program also use to the stripping station to decrease changeover time , Precise positioning can improve creation efficiency.
Primary Requirements:
Model | MHK-1050T/TC | MHK-1050 | MHK-1050CE |
Max.Sheet size | 1050*750 mm | 1050*750 mm | 1050*750 mm |
Min. Sheet size | four hundred*360 mm | four hundred*360 mm | four hundred* 360 mm |
Max.Die lower dimension | 1040*720 mm | 1040* 720mm | 1040*720 mm |
Max Sizzling stamping measurement | 1040*720mm | No | No |
Interior chase size | 1080*745mm | 1080*745 mm | 1080*745 mm |
Paper thickness |
80-600g/m2 corrugated significantly less than 4mm |
80-600g/m2 corrugated much less than 4mm |
eighty-600g/m2 corrugated less than 4mm |
Accuracy | less than .1mm | much less than .1mm | less than .1mm |
Max. stress | 300T | 300T | 300T |
Max die lower speed | 7500s/h | 7500 s/h | 7500 s/h |
Max feeder pile peak | 1600mm(incorporate pallet) | 1600mm(consist of pallet) | 1600mm(contain pallet) |
Max shipping and delivery pile top | 1400mm(include pallet) | 1400mm(include pallet) | 1400mm(consist of pallet) |
Max.foil diameter | 250mm(vertical) 200mm(horizontal) | No | No |
Foil width | twenty-1571 mm | No | No |
Primary motor | 11Kw | 11Kw | 11Kw |
Overall dimensions | 7700*5200*2600mm | 6300*4600*2400mm | 7700*4600*2400mm |
Machine fat | eighteen.five Ton | 16 Ton | 17 Ton |
Total power | fifty two Kw |